​This is a polishing system designed to remove medium and deep defects (P1000–P1200) from painted and gelcoat surfaces. It can be used with both rotary and orbital polishers. Excellent on old, fresh and scratch-resistant paints. Exceptional on ultra-high-solids (soft) clear coats. Leaves a brilliantly shiny finish free from dullness and holographic effects.

Where to use it
Suitable for all automotive paints, including: traditional clear coats and low-VOC ultra-high-solids clear coats, air-drying clear coats, scratch-resistant clear coats and all original equipment manufacturer (OEM) paints. Perfect as a single-step treatment on gelcoat. 

Advantages 
PERMANENT REMOVAL OF DEFECTS. The product does not mask imperfections, scratches and holograms with cosmetic oils, but removes them permanently.

CLEAN ACTION. Product designed and developed for fast and clean action without the addition of water. Allows easy control over the removal of defects. Reduces polishing time. No need for polishes or waxes to mask halos.

APPROVED BY BODY SHOP PROFESSIONALS. Free from silicone and ammonia.

VERY LOW VOC. Low VOC content.

HEALTH AND SAFETY. Non-irritating, non-harmful and non-flammable. 

How to use it effectively 
WITH A ROTARY POLISHER: Use with the 360 FOAMED WOOL PAD or the 352 GREY CUTTING FOAM PAD to remove P1000 sanding marks – P1200, and finish with the 352 YELLOW POLISHING FOAM PAD to restore the original shine without any dullness or holographic effects. For a perfect single-pass result, use Super Cut Compound with the 352 BROWN CUTTING FOAM PAD.

Step 1. For better abrasive action, use Super Cut Compound with the 360 FOAMED WOOL PAD or the 352 BROWN CUTTING FOAM PAD at a speed of 1200–1800 rpm. Step 2. For a polishing action that leaves no dullness, streaks or holographic effects, use Super Cut Compound with the 352 BROWN CUTTING FOAM PAD at a speed of 1200–1800 rpm, or with the 352 YELLOW POLISHING FOAM PAD.

WITH AN ORBITAL POLISHER: Use with the 361 WOOL PAD or the 352 GREY CUTTING FOAM PAD to remove P1000–P1200 sanding marks, and finish with the 352 YELLOW POLISHING FOAM PAD to restore the original shine without dullness or holographic effects. For a perfect single-pass result, use Super Cut Compound with the 352
BROWN CUTTING FOAM PAD.

Step 1. Use Super Cut Compound with the 361 WOOL PAD, or with the 352 GREY CUTTING FOAM PAD (P1200), or with the 352 BROWN CUT&POLISH FOAM PAD (P1500) for rapid abrasive action. 

Step 2. Use with the 352 YELLOW POLISHING FOAM PAD or the 352 BLACK FINISHING FOAM PAD to restore maximum shine without streaks, dullness or holographic effects.