​ It is a polishing system for the removal of medium and deep defects (P1000-P1200) from painted and gelcoat surfaces. It can be used with both rotary and orbital polishers. Excellent on old, fresh and scratch resistant paints. Great on Ultra High Solid (soft) clear coats. Leaves a brilliant final result without hazes and holograms. 

WHERE TO USE  484 ULTRA FAST CUT
Can be used on all automotive paints such as: traditional clearcoat and low VOC Ultra High Solid, air-drying clearcoat, scratch-resistant clearcoat and all original equipment paints. Perfect as a single pass on gelcoat. 

ADVANTAGES
DEFINITIVE REMOVAL OF THE DEFECT. The product does not mask imperfections, scratches and holograms with cosmetic oils and fillers, but removes them permanently.
CLEAN ACTION. 484 was studied and developed for a quick and clean action without adding water. Allows for easy control of defect removal. Reduces polishing times.
APPROVED BY CAR DEALERS. Silicone and ammonia free.
LOW V.O.C. LOW V.O.C content
HEALTH AND SAFETY. Non-irritating, harmful and flammable. 

HOW TO USE 484 ULTRA FAST CUT
WITH ROTARY POLISHING MACHINE: 
Use with 360 FOAMED WOOL PAD or with 352 GRAY CUTTING FOAM PAD to remove sanding marks P800-P1200 and finish with 352 YELLOW POLISHING FOAM PAD to restore the original shine without hazes and holograms. For a perfect single-pass result, use 484 ULTRA FAST CUT with the brown abrasive sponge pad 352 BROWN CUTTING FOAM PAD.

​Step 1. For a better abrasive action, use 484 ULTRA FAST CUT with a 360 FOAMED WOOL PAD or with the brown abrasive sponge pad 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm. 
Step 2. For a polishing action without hazes, halos and holograms, use 484 ULTRA FAST CUT with the 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm or with the yellow polishing pad 352 YELLOW POLISHING FOAM PAD.

 USE WITH ORBITAL POLISHING MACHINE: 
Use with 361 WOOL PAD or 352 GRAY CUTTING FOAM PAD to remove sanding marks P800-P1200 and finish with 352 YELLOW POLISHING FOAM PAD to restore the original shine without hazes and holograms. For a perfect single-pass result, use 484 ULTRA FAST CUT with 352 BROWN CUTTING FOAM PAD.

Step 1. Use 484 ULTRA FAST CUT with 361 WOOL PAD or with 352 GRAY CUTTING FOAM PAD (P800) or with 352 BROWN CUT&POLISH FOAM PAD (P1200) for a quick abrasive action. 
Step 2. Use with the 352 YELLOW POLISHING FOAM PAD pad or with the 352 BLACK FINISHING FOAM PAD pad to restore maximum brilliance without hazes and holograms. 

TECHNICAL ANNOUNCEMENTS
Do not use too much product. 
Do not add water during polishing.

1 - Apply a small quantity of 484 ULTRA FAST CUT on the surface to be treated or on the pad. 
2 - Polish small areas at a time. Polish the surface by applying medium pressure until the defect is completely removed. 
3 - Reduce pressure to restore maximum shine. 
4 - Remove any residues with our ULTRAMICROFIBRA CLOTH. 
5 - For good protection, apply 453 GLOSSY with PTFE. 
6 - For long-term protection (about 12-18 months) apply 463 PAINT SEALANT which resists 150 manual washes with hydrophobic effect.