USE 
Abrasive polish for removing paint defects such as sanding marks, scratches from car washes, paint oxidation, etc. RESTORATION Restores the gloss to dull and oxidized paints with simple operations. 

TRANSPARENT ACTION 
Product studied and developed for quick and clean use without water. Allows you to see the removal of the defect immediately. Reduced working time. 

DEFINITIVE REMOVAL OF THE DEFECT 
The product does not mask imperfections or scratches with cosmetic oils, but eliminates them definitively. 

USE 
On all types of paint, including: acrylics, water-based, high-solids, two-component, single-component, and original products from car manufacturers OEM. Great for polishing ceramic paints and new generation transparent coatings, low COV/VOC. 

FREE FROM GREASY PRODUCT HALOS 
The product works without leaving greasy halos on the surface that do not allow immediate visibility of the removal of the scratch. 

APPROVED 
Ammonia-free and silicone-free. 

LOW COV/V.O.C. 
Contains a very low content of VOC for better environmental conditions. 

HEALTH AND SAFETY 
Non-irritating, non-toxic, non-flammable. 

FOR A BETTER RESULT: 
Step1: Use OEM POLISH CERAMIC ABRASIVE FINE 473 with the Allchem FOAMED WOOL PAD at medium speeds around 1200-1800 rpm, for a better cutting action. 
Step2: Use OEM POLISH CERAMIC ABRASIVE FINE 473 with the Allchem variable contact white pad at medium speed around 1200-1800 rpm, for a high final gloss, without halos. 
NOTE 1 Do not use excessive product. 
NOTE 2 Do not add water during use. 
NOTE 3 When a new pad is activated with water, it does not require additional water during polishing. 
1) Apply OEM POLISH CERAMIC ABRASIVE FINE 473 in small quantities to the surface to be polished. Polish small areas at a time. 
2) Polish the surface by applying medium pressure until the defects and imperfections are removed. 
3) Reduce pressure to start the polishing action. 
4) After polishing, remove residues with our MICROF microfiber cloth. 
5) If necessary, finish polishing always with OEM POLISH CERAMIC ABRASIVE FINE 473 with a white pad. ​