​ USE 
Abrasive gel for the definitive removal of defects such as sanding marks P1200-1500 and scratches from abrasive pastes. Leaves a very bright final result without opacity and holograms. 

CLEAN ACTION 
Product studied and developed for a fast and clean action without the addition of water. Allows for easy control of defect removal. Reduces polishing times. Does not require polish and wax for the masking of halos. 

DEFINITIVE REMOVAL OF DEFECT 
The product does not mask imperfections, scratches, and holograms with cosmetics, but removes them definitively. 

USE 
Can be used on all car paints such as traditional transparent and Ultra High Solid with low VOC, air-drying transparent, scratch-resistant transparent, and all first-coat paints. Perfect as a final step on plastics and polycarbonate. 

APPROVED BY CAR BODY SHOPS 
Silicone-free and ammonia-free.  

VERY LOW V.O.C. 
Low VOC content. 

HEALTH AND SAFETY 
Not irritating, harmful, or flammable. 

FOR A BETTER RESULT WITH ROTARY POLISHER 
Step 1. 
For better abrasive action, use 472PLUS with FOAMED WOOL PAD or PURPLE CUTTING FOAM PAD at a speed of 1200-1800 rpm. 

Step 2. 
For a polishing action without opacity, halos, and holograms, use 472PLUS with the WHITE FOAM PAD at a speed of 1200-1800 rpm or with the BLACK FOAM PAD. 

 FOR A BETTER RESULT WITH ORBITAL POLISHER
Step 1. Use 472PLUS with the Bordeaux Extra Cutting DA THIN PAD (P1200) or with the Gray DA THIN PAD (P1500) for a rapid abrasive action. 

Step 2. Use with the Yellow Polishing DA THIN PAD to restore maximum brightness without halos, opacity, and holograms. 

NOTE 1 
Do not use excessive product quantity. 
NOTE 2 
Do not add water during polishing. 
NOTE 3 
1. Apply a small amount of 472PLUS to the surface to be treated. Polish small areas at a time. 
2. Polish the surface applying medium pressure until the complete removal of the defect. 
3. Reduce pressure to restore maximum brightness. 
4. Remove any residues with our ULTRAMICROFIBRE CLOTH. 
5. For good protection, apply 453 GLOSSY to PTFE. 
6. For long-term protection (about two years), apply 463 PAINT SEALANT, which resists 150 manual washes with an hydrophobic effect.