USE 
Abrasive liquid for the definitive removal of painting defects, such as polishing signs (P1200-1500) and scratches caused by abrasive pastes, which makes the surface perfectly shiny and without holograms. Even cleaning the surface with isopropyl alcohol, halos, scratches and holograms do not reappear.  

TRANSPARENT ACTION 
Product studied and developed for rapid and clean use without adding water. Allows to see immediately the removal of the defect. Reduced working time. 

DEFINITIVE REMOVAL OF DEFECT 
The product does not mask imperfections, scratches and holograms with cosmetic oils, but eliminates them definitively. 

USE 
Can be used on all types of paint: acrylic, water-based, high-solids low COV, two-component, single-component, and original products of automotive manufacturers OEM.    Suitable for polishing ceramic paints anti-scratch and new water-based transparent. Perfect as a final step on Policarbonate. 

APPROVED 
Free from Ammonia and Silicone. 

LOW V.O.C. 
Extremely low COV content, for better environmental conditions. 

HEALTH AND SAFETY 
Non-irritating, non-toxic, non-flammable. 

FOR A BETTER RESULT 
Step 1. 
Use 472FAST CUT & POLISH with the Allchem FOAMED WOOL PAD cuff, at medium speed 1200-1800 rpm, for a better abrasive action (removes polishing signs P1200-1500). 
Step 2. 
Use 472FAST CUT & POLISH with the Allchem Variable Contact white pad, at medium speed 1200-1800 rpm, for a high final shine without holograms, signs or halos. For a perfect final result, on black cars, give a third pass of 472FAST CUT & POLISH with the black soft pad.  
NOTE 1 
Do not use excessive amounts of product. 
NOTE 2 
Do not add water during use. 
NOTE 3 
1. Apply a small amount of 472FAST CUT & POLISH to the surface to be treated. Polish small areas at a time. 
2. Polish the surface by applying medium pressure, until the complete removal of scratches and imperfections. 
3. Reduce pressure to start the polishing action. 
4. After polishing, remove residues with our microfiber cloth MICROF® 
5. If necessary, finish polishing always with 472FAST CUT & POLISH with white or black pad