​ It is a polishing system for the removal of medium and deep defects (P600-P800) from clear coat and gelcoat surfaces. It can be used with both rotary and orbital polishers. Excellent on old, fresh and scratch resistant clear coats. Great on Ultra High Solid (soft) clear coats. Leaves a brilliant final result without hazes and holograms. 

Where to use 436
 ​ Can be used on all automotive paints such as: traditional clearcoat and low V.O.C. Ultra High Solid, air-drying clearcoat, scratch-resistant clearcoat and all original equipment paints. Perfect solution to restore the gloss on gelcoat with deep scratches. 

Advantages
 DEFINITIVE DEFECT REMOVAL. ​ The product does not mask imperfections, scratches and holograms with cosmetic oils and fillers, but removes them permanently.  
CLEAN WORK. P​ Product studied and developed for a quick and clean action without adding water. Allows for easy control of defect removal. Reduces polishing times. No need to use waxes for hologram masking.  
APPROVED BY BODYSHOPS. ​ Silicone and ammonia free.  
VOC CONTENT. Low VOC content.  
HEALTH AND SAFETY. ​ Non-irritating, harmful and flammable. 

How to use 436 
WITH ROTARY POLISHER: 
​ 436 COARSE CUT with 360 FOAMED WOOL PAD or 352 GREY CUTTING FOAM PAD to remove sanding marks P600-P800 and finish with 352 ORANGE FOAM PAD pad to restore the original shine. For a perfect one-step result, use 436 COARSE CUT with the 352 GREY CUTTING FOAM PAD.  
Step 1. For a better abrasive action, use 436 EXTRA COARSE CUT with a FOAMED WOOL PAD or with a 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm.  
Step 2. For a polishing action use 436 EXTRA COARSE CUT with the 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm or with the 352 ORANGE POLISHING FOAM PAD.  
 
USE WITH ORBITAL POLISHER: 
​ Use with 361 WOOL PAD or with 352 GRAY CUTTING FOAM PAD to remove sanding marks P600-800 and finish with 352 ORANGE POLISHING FOAM PAD to restore original shine.  
​ Step 1. Use 436 EXTRA COARSE CUT with 361 WOOL PAD or 352 GREY CUTTING FOAM PAD (P600-800) for fast abrasive action.  
Step 2. Use with the 352 YELLOW POLISHING FOAM PAD pad or with the BLACK FINISHING FOAM PAD pad to restore maximum brilliance.