USE 
Abrasive liquid for the removal of paint defects such as sanding marks, scratches from car washes, paint oxidations, etc. 

RESTORATION 
Restores the shine to matte and oxidized paints with simple operations. 

TRANSPARENT ACTION 
Product designed and developed for quick and clean use without water. Allows immediate defect removal visibility. Reduced processing time. 

DEFINITIVE DEFECT REMOVAL 
The product does not mask imperfections or scratches with cosmetic oils, but eliminates them permanently. 

USE 
On all types of paint, including: acrylics, water-based, high solids, 2 components, single components, and original products from automotive OEMs. Cars, Boats, Industry. 

FREE FROM GREASY PRODUCT HALOS 
The product works without leaving greasy halos on the surface, which do not allow immediate scratch removal visibility. APPROVED Ammonia and Silicone-Free. Paintable. 

LOW C.O.V./V.O.C. 
Contains a very low content of COV/VOC for better environmental conditions. 

HEALTH AND SAFETY 
Non-irritating, Non-hazardous, Non-flammable. 

FOR A BETTER RESULT: 
Use FINE CUT 433 with the Allchem FOAMED WOOL PAD lamb cap, at low speeds around 1200-1800 rpm, for better cutting action. Use with Allchem variable contact pads at low speeds 1200-1800 rpm, for a better final shine. 
NOTE 1 Do not use excessive product. 
NOTE 2 On fresh, sensitive, or incompletely crosslinked paints, adding water can help reduce heating due to pad friction during polishing. Do not use excessive amounts of water. 
NOTE 3 When a new pad is activated with water, no additional water is needed during polishing. 1) Apply FINE CUT 433 in small quantities on the surface to be polished. Polish small areas at a time. 2) Polish the surface applying medium pressure until the defects and imperfections are removed. 3) Reduce pressure to start the polishing action. 4) After polishing, remove residues with our MICROF® microfiber cloth 5) If necessary, finish by polishing with GLOSSY 453 polish (hand/machine) or with ACQUALUX 470 Gel (Machine).