​USE 
Abrasive liquid for removing painting defects such as sanding marks, scratches from car washes, paint oxidation, etc. 

RESTORATION 
Restores the gloss on dull and oxidized paint with simple operations. 

TRANSPARENT ACTION 
Product studied and developed for quick and clean use without water. Allows you to see the removal of the defect immediately. Reduced working time. 

DEFINITE REMOVAL OF THE DEFECT 
The product does not mask imperfections or scratches with cosmetic oils, but eliminates them definitively. 

USE 
On all types of paint including: acrylics, water-based, high-solids, 2-component, monocomponent and original products from car manufacturers OEM including scratch-resistant paint. Cars, nautical and industry. 

FREE OF GREASY PRODUCT HALOS 
The product works without leaving greasy halos on the surface which do not allow the immediate vision of the removal of the scratch. 

APPROVED 
Ammonia and silicone free. Paintable. LOW V.O.C. Contains a low content of VOC for better work. 

HEALTH AND SAFETY 
Non-irritating, non-toxic, non-flammable. 

FOR A BETTER RESULT 
Use FAST CUT 426 with the lamb's wool pad or the yellow abrasive Allchem pad at low speeds 1200-1800 RPM approx for a better cutting action. Use with the white Allchem pads with variable contact at low speed 1200-1800 RPM approx for a better final gloss.

NOTE 1 
Do not use excessive product. 

NOTE 2 
On fresh, sensitive or not completely cross-linked paints, the addition of water can help reduce the heating due to the friction of the pads in the polishing process. Do not use excessive water quantity. 

NOTE 3 
When a new pad is activated with water, it does not need other water during polishing. 
1) Apply FAST CUT 426 in small quantities on the surface to be polished. Polish small areas at a time. 
2) Polish the surface applying a medium pressure until the removal of defects and imperfections. 
3) Reduce the pressure to start the polishing action. 
4) After polishing, remove the residues with our microfiber cloth MICROF® 
5) If necessary, finish polishing with polish GLOSSY 453 (hand/machine) or with ACQUALUX 470 Gel (Machine).