​ It is a polishing system for the removal of medium and deep defects (P1200-P1500) from clear coat and gelcoat surfaces. It can be used with both rotary and orbital polishers. Excellent on old, fresh and scratch resistant clear coats. Great on Ultra High Solid (soft) clear coats. Leaves a brilliant final result without hazes and holograms.

 WHERE TO USE 415
Can be used on all automotive paints such as: traditional clearcoat and low V.O.C. Ultra High Solid, air-drying clearcoat, scratch-resistant clearcoat and all original equipment paints. Perfect on OEM car factories. 

ADVANTAGES 
DEFINITIVE REMOVAL OF THE DEFECT. The product does not mask imperfections, scratches and holograms with cosmetic oils and fillers, but removes them permanently. 
CLEA​N ACTION. Product studied and developed for a quick and clean action without adding water. Allows for easy control of defect removal. Reduces polishing times. No need to use waxes for hologram masking. 
APPROVED BY CAR MANUFACTURER. Free from silicone and ammonia. 
VERY LOW V.O.C. Low VOC content 
HEALTH & SAFETY. It is non-irritating, harmful and flammable. 

 HOW TO USE 415
WITH ROTARY POLISHER: Use 415 ULTRA FAST CUT & POLISH with 360 FOAMED WOOL PAD or 352 GREY CUTTING FOAM PAD to remove sanding marks P1500-P2000 and finish with 352 ORANGE FOAM PAD pad to restore the original shine without haze and holograms. For a perfect one-step result, use 415 ULTRA FAST CUT & POLISH with the 352 BROWN CUTTING FOAM PAD. 
Step 1. For a better abrasive action, use 415UFC with a FOAMED WOOL PAD or with a 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm. 
Step 2. For a polishing action without hazes, halos and holograms, use 415UFC with the 352 BROWN CUTTING FOAM PAD at a speed of 1200-1800 rpm or with the 352 ORANGE POLISHING FOAM PAD. 

WITH ORBITAL POLISHER: Use with 361 WOOL PAD or with 352 GRAY CUTTING FOAM PAD to remove sanding marks P1200-P1500 and finish with 352 ORANGE POLISHING FOAM PAD to restore original shine without hazes and holograms. For a perfect one step result use 415UFC with 352 BROWN CUTTING FOAM PAD. 
Step 1. Use 415UFC&P with 361 WOOL PAD or 352 GREY CUTTING FOAM PAD (P1200) for fast abrasive action. 
Step 2. Use with the 352 YELLOW POLISHING FOAM PAD pad or with the BLACK FINISHING FOAM PAD pad to restore maximum brilliance without hazes and holograms. 
Is possible to use 415UFC&P and WHITE CUTTING MICROFIBER PAD to have a good cutting action with very high final gloss.  

​TECHNICAL ANNOUNCEMENTS
Do not use too much product.
Do not add water during polishing.
1. Apply a small amount of 415UFC&P on the surface to be treated. 
2. Polish small areas at a time. Polish the surface by applying medium pressure until the defect is completely removed. 
3. Reduce pressure to restore maximum shine. 
4. Remove any residue with our ULTRAMICROFIBRE CLOTH. 
5. For good protection, apply 453 GLOSSY with PTFE. 
6. For long-lasting protection apply 463 PAINT SEALANT which resists 150 manual washes with a hydrophobic effect.